JBL LSR6328P Powered Studio Monitor
SKU: 0738069b244a
Načini plaćanja i dostava
Cene na našem sajtu variraju u odnosu na načine plaćanja. Cene na svakom proizvodu prikazane su na dva načina:
MPC – maloprodajna cena artikla
GOT – gotovinsko plaćanje (plaćanje gotovinom u maloprodaji, plaćanje karticom preko sajta odjednom, plaćanje pouzećem, plaćanje uplatnicom, plaćanje po predračunu)
Plaćanje na rate je moguće karticama Banca Intese i to:
Kreditnim karticama – Visa, Master, AmEx na 24 rate
Debitnim karticama – Visa, Dina na 12 rata
Dostava se naplaćuje po cenovniku kurirske službe.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Opis proizvoda
The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. THX® pm3 Approved. METAlliance® Certified.
Tehničke specifikacije proizvoda
- Features:
- Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position.
- RMC™ Room Mode Correction provides electronic control of room modes. User measurement and calibration kit available.
- Differential Drive® technology with dynamic braking for extended low frequency response and minimal power compression.
- Integrated bi-amplification with factory calibrated sensitivities.
- Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control.
- Magnetically shielded high frequency transducer minimizes interference when used in close proximity to video monitors.
- High-density baffle for low enclosure resonance.
- Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
- Reinforced enclosure and convenient mounting points for mounted installation.
- Integral handles facilitate ease of positioning.
- Specifications:
- Frequency Response: 50 Hz - 20 kHz (+1, -1.5 dB)
- Enclosure Resonance Frequency: 38 Hz
- Low Frequency Extension: User controls set to default
- -3 dB: 46 Hz
- 10 dB: 36 Hz
- Low-High Frequency Crossover: 1.7 kHz 6th-order acoustic Linkwitz-Riley
- Distortion, 96 dB SPL, 1m: N/A
- Mid-High Frequency (120 Hz - 20 kHz): N/a
- 2nd Harmonic: <0.6%
- 3rd Harmonic: <1%
- Maximum SPL (80 Hz - 20 kHz): >108 dB SPL / 1m
- Maximum Peak SPL (80 Hz - 20 kHz): >111 dB SPL / 1m
- Signal Input: Neutrik “Combi” XLR-1⁄4-in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 (1⁄4" tip) produces outward woofer motion
- Calibrated Input Sensitivity, XLR & 1⁄4": N/A
- +4 dBu / +8 dBu: 96 dB SPL / 1 m
- -10 dBV: 96 dB SPL / 1 m
- AC Input Voltage: 100 / 240 VAC
- AC Input Connector: IEC
- Long-Term Maximum System Power: 220 W (IEC265-5)
- Self-Generated Noise Level: <+10 dBA / 1 m Tonal-artifact-free