JBL CONTROL 50S/T-WH Subwoofer za Loudspeaker Sistem
Načini plaćanja i dostava
Cene na našem sajtu variraju u odnosu na načine plaćanja. Cene na svakom proizvodu prikazane su na dva načina:
MPC – maloprodajna cena artikla
GOT – gotovinsko plaćanje (plaćanje gotovinom u maloprodaji, plaćanje karticom preko sajta odjednom, plaćanje pouzećem, plaćanje uplatnicom, plaćanje po predračunu)
Plaćanje na rate je moguće karticama Banca Intese i to:
Kreditnim karticama – Visa, Master, AmEx na 24 rate
Debitnim karticama – Visa, Dina na 12 rata
Dostava se naplaćuje po cenovniku kurirske službe.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Opis proizvoda
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.
Tehničke specifikacije proizvoda
- Frequency Range (-10 dB) 32 Hz – 200 Hz
- Frequency Response (±3 dB) 50 Hz – 150 Hz
- Power Capacity 300 Watts Continuous Program Power (2 hrs), 150 Watts Continuous Pink Noise (2 hrs), 200 Watts Continuous Program Power (100 hrs), 100 Watts Continuous Pink Noise (100 hrs)
- Nominal Sensitivity (2.83V, 1m) 95 dB (near corner), 89 dB (center of wall)
- Rated Maximum SPL (1m) 115 dB average, 121 dB peak (near corner), 109 dB average, 115 dB peak (center of wall)
- Nominal Impedance 8 ohms (in bypass/thru mode)
- Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
- Transducer Driver 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
- Input Connectors Six removable locking 2-pin connectors with screw-down terminals.
- Max wire 12 AWG (2.5 mm2)
- Material Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
- Dimensions (H x W x D) Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)
- Wall Bracket: 15 mm (0.6 in) deep
- Wall Bracket 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
- Net Weight 9.0 kg (20 lbs)
- Shipping Weight 10.2 kg (23 lbs)
- Included Accessories Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.