Neumann M 150 Tube mikrofon

The Titanium diaphragm of the pressure capsule is 12 mm in diameter
and is exceedingly thin. Although Titanium has been known to have unique
and desirable characteristics for some time, it has, until very
recently, been very difficult to procure in the quality necessary for
use in a microphone of this type.

The headgrille is shaped just
like that on the original M 50, as requested by various top engineers in
the recording industry. Due to mounting the pressure capsule with the
diaphragm flush to the surface of a small (40 mm) sphere, the
directional characteristic of the M 150 Tube is entirely unique.

At
the lowest frequencies, this system is a pure omnipressure transducer
with a perfectly circular polar pattern. However, in the mid- and upper
frequencies, the pickup pattern becomes more narrow. The M 150 Tube is
an ideal microphone for any stereo, 5.1 or 7.1 surround recording,
particularly DECCA Tree technique.

The dynamic range of the M 150 Tube is 119 dB, allowing reproduction of the full musical expression, without restraint.

With
a low self noise of 15 dB-A, more gain can be used without risk of
adding noise to the final product. The transformerless output circuit of
this microphone allows for extremely fine reproduction of small signals
and low frequency information. Also, long cable runs can be used with
no loss of signal quality.

*The design of the microphone is a registered design of the Georg Neumann GmbH in certain countries.