Audio-Technica ES945/LED Equipped table-mount boundary microphone with mute switch/LED
Na zalihama
Načini plaćanja i dostava
Cene na našem sajtu variraju u odnosu na načine plaćanja. Cene na svakom proizvodu prikazane su na dva načina:
MPC – maloprodajna cena artikla
GOT – gotovinsko plaćanje (plaćanje gotovinom u maloprodaji, plaćanje karticom preko sajta odjednom, plaćanje pouzećem, plaćanje uplatnicom, plaćanje po predračunu)
Plaćanje na rate je moguće karticama Banca Intese i to:
Kreditnim karticama – Visa, Master, AmEx na 24 rate
Debitnim karticama – Visa, Dina na 12 rata
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Opis proizvoda
The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from Radio Frequency Interference (RFI). This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360° pickup angle, and is available in two colors: black (ES945) and white (ES945W).
Tehničke specifikacije proizvoda
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Omnidirectional
- FREQUENCY RESPONSE 40-18,000 Hz
- OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
- IMPEDANCE 200 ohms
- MAXIMUM INPUT SOUND LEVEL 142 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical) 112 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 64 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
- WEIGHT 63 g (2.2 oz)
- DIMENSIONS 69.0 mm (2.72") long, 28.0 mm (1.10") diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORY FURNISHED One pair isolators