Audio-Technica BP4025 Kondenzatorski stereo X/Y field recording mikrofon
Na zalihama
Načini plaćanja i dostava
Cene na našem sajtu variraju u odnosu na načine plaćanja. Cene na svakom proizvodu prikazane su na dva načina:
MPC – maloprodajna cena artikla
GOT – gotovinsko plaćanje (plaćanje gotovinom u maloprodaji, plaćanje karticom preko sajta odjednom, plaćanje pouzećem, plaćanje uplatnicom, plaćanje po predračunu)
Plaćanje na rate je moguće karticama Banca Intese i to:
Kreditnim karticama – Visa, Master, AmEx na 24 rate
Debitnim karticama – Visa, Dina na 12 rata
Dostava se naplaćuje po cenovniku kurirske službe.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Opis proizvoda
Designed for broadcast and professional recording, Audio-Technica’s BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Tehničke specifikacije proizvoda
- ELEMENT Fixed-charge back plate permanently polarized condenser
- POLAR PATTERN X/Y Stereo
- FREQUENCY RESPONSE 20-17,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa
- CHANNEL BALANCE <2.5 dB
- IMPEDANCE 170 ohms
- MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
- DYNAMIC RANGE (typical) 131 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 80 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 7 mA typical (both channels total)
- SWITCH Flat, roll-off; 10 dB pad (nominal)
- WEIGHT 269 g (9.5 oz)
- DIMENSIONS 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter, 21.0 mm (0.83") body diameter
- OUTPUT CONNECTOR Integral 5-pin XLRM-type
- CABLE 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
- ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch