Muzički instrumenti i oprema – prodavnica muzičkih instrumenata i opreme i online shop (381) 11 334-56-17, E-mail: office@musiccentar.com

Logo MMC

Audio-Technica BP4071 Kondenzatorski Line + Gradient shotgun mikrofon (395mm)

blank

Besplatna dostava
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.blank

Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.blank

Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.

Opis proizvoda

With directivity equal to mics up to 50% longer, the BP4071 has been specially created to meet the pickup demands of broadcasting, film/TV sound, professional recording, wildlife recording and theater sound reinforcement. Particularly useful for miking dynamic action in film/TV audio as well as in “spot” miking techniques in the music studio or theater, the 15.55"-long BP4071 provides a low noise floor and direct-coupled, balanced output for a clean signal even in high-output conditions. Audio-Technica has pioneered an interference tube design in the BP4071 that provides the same directivity as mics up to 50 percent longer.

Tehničke specifikacije proizvoda

  • ELEMENT Externally polarized (DC bias) capacitor
  • POLAR PATTERN Line + gradient
  • FREQUENCY RESPONSE 20-20,000 Hz
  • LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
  • OPEN CIRCUIT SENSITIVITY -29 dB (35.5 mV) re 1V at 1 Pa
  • IMPEDANCE 50 ohms
  • MAXIMUM INPUT SOUND LEVEL 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
  • NOISE 13 dB SPL
  • DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL
  • SIGNAL-TO-NOISE RATIO 81 dB, 1 kHz at 1 Pa
  • PHANTOM POWER REQUIREMENTS 48V DC, 4.8 mA typical
  • SWITCHES Flat, roll-off; 10 dB pad (nominal)
  • WEIGHT 136 g (4.8 oz)
  • DIMENSIONS 395.0 mm (15.55") long, 21.0 mm (0.83") maximum body diameter
  • OUTPUT CONNECTOR Integral 3-pin XLRM-type
  • ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8145 windscreen; two O-Rings; protective carrying case