Muzički instrumenti i oprema - prodavnica muzičkih instrumenata i opreme i online shop (381) 11 334-56-17, E-mail:

Izaberite stranicu

Besplatna dostava
Besplatna dostava je za sve artikle koji su plaćeni preko 15.000 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.

Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.

Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.

Opis proizvoda

The modular KM A / KM D miniature microphone system is a further development of the successful KM 100 series. The newly developed passive capsule design is available with 8 different directional characteristics, and can be combined modularly as desired with an analog (KM A) or digital (KM D) output stage in accordance
The KM A analog output stage with P48 phantom power has a switch for
pre-attenuation of 10 dB. The microphones can thus handle levels of up
to 152 dB (depending on the capsule type). The KM D digital output stage
converts the signal from the capsule directly into a digital signal.
The result is an AES/EBU signal with 24 bits and a large dynamic range.
The integrated digital signal processor (DSP) permits remote control of
the microphones, including the digital gain, pre-attenuation (6 dB, 12
dB or 18 dB) and low-cut filter (0 Hz, 40 Hz, 80 Hz or 160 Hz). An
integrated peak limiter and compressor/limiter with additional de-esser
function prevents any overloading of the audio signal.

dimensions (diameter 22 mm, length 93 mm) of the analog and digital
output stages are identical. As a result, all accessories can be used in
combination with both output stages.
Upon request, a mechanical
adapter can be supplied to adapt microphone capsules of the KM 100
system (AK series) to the KM A and KM D output stages.

modular solution permits the microphone capsule to be separated from the
output stage by a distance of up to 100 m. The LC 4 microphone cable
with a length of 5 or 10 meters is available as a standard solution.
Alternatively, capsule extensions of different lengths, swivel joints
and stand mounts, etc., can be used for a flexible system setup.

capsule heads KK 183, KK 184 or KK 185, together with the appropriate
output stage, are also available as a set, in which case they are
referred to as KM 183 A, KM 183 D, etc.

Tehničke specifikacije proizvoda

  • Acoustic operating principle pressure gradient transducer
  • Directional pattern Cardioid
  • Frequency range 20 Hz...20 kHz
  • Sensitivity1) -39 dBFS
  • Equivalent noise level, CCIR3) 24 dB
  • Equivalent noise level, A-weighted3) 13 dB-A
  • Signal-to-noise ratio2) CCIR3) 70 dB
  • Signal-to-noise ratio2) A-weighted3) 81 dB
  • Max SPL at 0 dBFS 133 dB
  • Max SPL with 18 dB preatt. 151 dB
  • Latency 44,1/48 kHz (samples) 41
  • Latency 88,2/96 kHz (samples) 49
  • Latency 176,4/192 kHz (samples) AES 3 99
  • Current consumption max. 150 mA (DPP)
  • Weight output stage 70 g
  • Weight capsule 15 g
  • Diameter 22 mm
  • Length 108 mm