Muzički instrumenti i oprema - prodavnica muzičkih instrumenata i opreme i online shop (381) 11 334-56-17, E-mail: office@musiccentar.com


Izaberite stranicu

Besplatna dostava
Besplatna dostava je za sve artikle koji su plaćeni preko 15.000 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.

Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.

Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.

Opis proizvoda

KH 120 D - Active Studio Monitor with Digital Inputs
Two-way bi-amplified monitor with thermally protected 80 + 80 W class A/B-amplifiers. Limit and clip indicated by dimmable logo LED. Magnetically shielded 1” titanium/fabric dome tweeter and 5 1/2” composite-sandwich membrane woofer. Tweeter and woofer protected by

General Description

Neumann is excited to introduce its latest innovation, the KH
120, representing the first product in the new line of Neumann
Studio Monitors. 

The KH 120 D studio monitor is designed for
use as a near-field loudspeaker or as a rear loudspeaker in larger
multi-channel systems. The KH 120 D represents the latest in acoustic
and electronic simulation and measurement technologies to ensure the
most accurate sound reproduction possible. It has a Mathematically
Modeled Dispersion waveguide (MMD ), flexible acoustical controls,
analog class-AB amplifiers, various input formats (analog and digital)
and an extensive mounting hardware range. All of this provides the
user with the maximum versatility over a wide variety of acoustic
conditions, source equipment, and physical locations.

The KH 120 D is perfect for tracking, mixing and mastering in music, broadcast, project and post-production studios. 

Tehničke specifikacije proizvoda

  • Acoustics
  • −3 dB free field frequency response 52 Hz … 21 kHz, ± 3 dB
  • Pass band free field frequency response 54 Hz … 20 kHz, ± 2 dB
  • Self-generated noise
  • (with input gain set to 100 dB for 0 dBu) < 20 dB(A) at 10 cm
  • Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m > 100 Hz
  • Max. SPL in full space / calc. in half space
  • at 3% THD at 1m 105.1 / 111.1 dB SPL
  • (averaged between 100 Hz and 6 kHz)
  • Bass capability: Max. SPL in half space
  • at 3% THD at 1m 104.8 dB SPL
  • (averaged between 50 Hz and 100 Hz)
  • Max. short term SPL with IEC-weighted noise (IEC 60286-5) at 1 m, in typical listening conditions 107 dB(C) SPL
  • Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair) 97 dB(C) SPL (full range)
  • 104 dB(C) SPL (with subwoofer)
  • Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair) 88 / 93 dB(C) SPL (full range)
  • 89 / 94 dB(C) SPL (with subwoofer)
  • Electronics
  • Woofer amplifier,
  • cont.(peak) output power* 50 W (80 W)
  • Tweeter amplifier,
  • cont.(peak) output power* 50 W (80 W)
  • Controller design Analog, active
  • Crossover Frequency 2.0 kHz
  • Crossover Slope (dB/oct.) 24, 4th order
  • Equalization - Bass 0, −2.5, −5, −7.5 dB
  • Equalization - Mid 0, −1.5, −3, −4.5 dB
  • Equalization - High +1, 0, −1, −2 dB
  • Protection circuitry Limiter: low, high
  • Infrasonic filter frequency; slope 30 Hz; 6 dB/oct.
  • Analog Input
  • Impedance, electrically balanced
  • 10k Ohms in position 94/108 dB SPL at 1 m
  • 20k Ohms in position 100/114 dB SPL at 1 m
  • Input gain control (sensitivity) 0 dBu to −15 dBu
  • Output level control 94, 100, 108, 114 dB SPL
  • CMRR >56 dB @ 15 kHz
  • Maximum input level 24 dBu
  • Digital Input/Output
  • Format BNC AES3, S/P-DIF
  • Impedance BNC, unbalanced 75 Ω (input/output)
  • Input switching Analog, Digital A, Digital B, Digital A+B (all available with and without delay)
  • Digital converter: resolution, design 16 … 24-bit DAC, Δ∑
  • Digital converter: sampling rate 32 … 192 kHz
  • Digital sensitivity −18 dBFS
  • D-A dynamic range 120 dB
  • Audio-Video/lip sync and Time-of-Flight delay range 0 … 400 ms
  • Audio-Video/lip sync max. frames 0 … 10 (40 ms) frames,
  • 0 … 12 (33 ms) frames
  • Resolution: time/distance 0,1 ms / 3.4 cm (1 3/8”)
  • Latency D-A (A-D-A) Approximately 1 ms (2 ms)
  • Displays and indicators - power on Neumann logo “White”
  • Displays and indicators - limit/clip Neumann logo “Red”
  • Displays and indicators - digital error Neumann logo “Red” flash
  • Mains Power Supply, voltage; frequency 100-240 V~; 50/60 Hz
  • Power consumption – Idle 40 W
  • Power consumption – Full output AC 200 W
  • Mechanics
  • Cabinet surface finish, color: custom Painted aluminium, Anthracite (RAL 7021)
  • Operating conditions +10° C to +40° C (+50° F to +104° F),
  • <90% RH, non-condensing
  • Transport/storage conditions −25° C to +70° C (−13° F to 158° F),
  • <90% RH, non-condensing
  • Drivers Magnetically shielded
  • Woofer 130 mm (5.25”)
  • Tweeter 25 mm (1”)
  • Mounting points 2 x M8 on rear panel
  • Height x width x depth, mm (inches) 277 x 182 x 220 mm (10 7/8” x 7 1/8” x 8 5/8”)
  • Internal net volume / external volume 6.5 liters / 9.7 liters
  • Weight 6.5 kg (14.3 lbs)
  • Delivery includes 1x KH 120 D
  • 1x Power cables (Euro and USA)
  • 1x Operating manual