Besplatna dostava je za sve artikle koji su plaćeni preko 15.000 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.
The Laney L5T-112 valve combo amplifier celebrates Laney's 40 years of manufacturing world-class valve amplifiers with vintage and modern tones.
The Laney L5T-112 combo is all valve, with 3 x 12ax7/ECC83 preamp valves and 1 EL84 output valves, Class-A single-ended circuitry for classic, warm valve tone. The L5T-112 is feature loaded: 2-channels, Clean and Drive, 2-inputs Hi gain and Lo with the input attenuated by half. Sealed Gold plated contact relays, jack sockets, Hi and Low gain inputs, and Gold plated printed circuit boards for minimum sound coloration. EQ provided by passive Bass, Middle and Treble, Tone boost and cut active on the top end of the signal, and Bright switch for edge and picking emphasis on the Drive channel and brightness and life to trebles on the Clean. Drive sets the level of valve preamp drive, increase to dirty up your tone. Effects Loop Send and Return for external rack mount effects .
The Laney L5T-112 Birch plywood cabinet mounts a unique Tilting Mechanism, allowing the cab to be used either upright or tilted back.
Single-ended class-A circuitry, as used in the Laney L5T-112 Lionheart combo, means the EL84 output valve is connected to one side of the L5T-112 output transformer's primary winding. The other side of the transformer primary is wired to the power supply. While giving less output power than the alternative push-pull circuitry, single-ended class-A produces more even order harmonics when over-driven. A great advantage to guitar players as even order harmonics provide the rich tone associated with classic class-a valve guitar amps.
The L5T-112 also features gold plated PCB's and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned "Type 4" large spring line reverb for the classic guitar reverb sound. Each L5T-112 features a hand stamped 'build number' in the order they come off the Laney production line, and comes with a custom made 'Lionheart' dust cover.
Lionheart represents everything we've learned through forty years of Laney tube heritage, distilled into a single amplifier range. Designed to deliver the ultimate tone of a tube being pushed hard - warm and expressive, at an output level which can be used in everyday environments. This amp provides the evocative, classic tones of hot tubes pushed hard, but at a volume level your neighbours can live with! Featuring the purest of designs - 'single-ended' Class A output achieved with a single EL84, driven from 3x 12AX7 preamp tubes.
Tehničke specifikacije proizvoda
- Power RMS: 5 Watts
- Inputs: 2x Jack, Hi & Lo
- Channels: Clean & Drive
- Equalisation: Passive Bass, Middle and Treble
- Bright Switch: Yes
- Preamp Valves: 3x 12ax7
- Output Valves: 1x EL84
- Class: Class A
- Reverb: Yes
- Footswitch: FS2 (Included)
- Speaker connections: 2x Jacks
- FX Loop(s): Yes
- Impedance: 4 and 8 ohm
- Drivers: 1x 12" Celestion Heritage G12H
- Baffle: Marine Grade Plywood
- Cabinet Design: Marine Grade Plywood cabinet with retro banding strip, leather strap handle and folding tilt back mechanism
- Weight: 19 Kg
- Dimensions (mm): Width 562 x Height 423 x Depth 253
- Channel Controls: Gain (Clean), Gain & Volume (Drive)
- Master Section: Global EQ, Reverb and Tone controls