Muzički instrumenti i oprema - prodavnica muzičkih instrumenata i opreme i online shop (381) 11 334-56-17, E-mail: office@musiccentar.com


Izaberite stranicu

Besplatna dostava
Besplatna dostava je za sve artikle koji su plaćeni preko 15.000 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.

Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.

Načini plaćanja
Naručivanje preko našeg sajta u proseku traje manje od jednog minuta i odvija se kroz nekoliko jednostavnih koraka.

Opis proizvoda

iRig Stomp I/O is a brand new type of USB pedalboard controller that integrates a professional, high-resolution, MFi certified audio interface with MIDI input/output for iPhone, iPad, Mac and PC. It comes bundled with state-of-the-art guitar, vocal processing, and recording software for flexibility and usability, both live and in the studio. Sturdy and robust, yet easily transportable, iRig Stomp I/O features four onboard metal stomp switches plus an expression pedal with a switch, all with LED indicators. To further extend its control possibilities, you can connect up to 2 additional switches or pedals. The MIDI IN/OUT ports make it possible to seamlessly control external processors when iRig Stomp I/O is used as a stand-alone MIDI foot controller, without any device or computer connected to it.

Tehničke specifikacije proizvoda

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power: USB bus powered (when used with a computer) or DC IN
  • Device Connection: USB B-Type and Mini-DIN
  • Enclosure: metal sheet
  • Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: approx 2 kOhms
  • Gain Range: approx 48 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS
  • Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground
  • Instrument Input Level: from 30mVpp to 6.9Vpp
  • Instrument Input Impedance: 1MOhms
  • Gain Range: approx 27dB
  • Frequency response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS
  • Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level control: numbered thumbwheel
  • Headphone Output Power: 100mW into 50Ohms
  • Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground
  • Maximum Output Level: +16 dBu into 600 Ohms balanced load
  • Output Impedance: 150 Ohms balanced
  • Floating Balanced Outputs
  • Connector: 2x 5-pin DIN
  • Four metal foot-switches with one indication LED each, dual color
  • Two analog potentiometers for Input GAIN and output VOLUME
  • "Stomp MODE" LED
  • "Phantom 48V" LED
  • "PEDAL" LED
  • 4 segments mono input level meter (peak)
  • 4 segments device output meter
  • Continuous pedal (expression pedal) with virtual switch at the top of its travel
  • Neutrik Combo socket for MIC input and Instrument input (auto selecting)
  • +48V phantom power switch
  • 1/4" headphones output
  • 2 x 1/4" TRS Balanced floating line outputs
  • MIDI I/O 5-pin DIN connectors
  • 2 x 1/4" TRS External controllers sockets
  • B-Type USB socket for connecting a computer (Mac/PC)
  • Mini-DIN "iOS" connector for connecting an iOS device
  • Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device 
    at the same time
  • iRig Stomp I/O
  • Lightning to Mini-DIN connection cable (60cm/23.62")
  • USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
  • DC power supply
  • Size: 41.5cm/16.3" x 21cm/8.5" x 7.2cm/2.83"
  • Weight: 3.2kg/7.1lb
  • Lightning to Mini-DIN connection cable (60cm/23.62")
  • USB A-Type to USB B-Type connection cable (2.5m/8.2ft)

Recenzije

Još nema komentara.

Budite prvi koji će napisati recenziju “IK Multimedia iRig Stomp I/O pedalboard controller”

Vaša adresa e-pošte neće biti objavljena. Neophodna polja su označena *