Electro-Voice CPS 4.5 - Audio pojačavač
Podeli |

Electro-Voice CPS 4.5 - Audio pojačavač

proizvođač: Electro-Voice

The CPS4.5 is an four-channel amplifier from Electro-Voice featuring groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks.

cena: 188.600,00 din.
(PDV uračunat)

Dodaj u korpu Kako se naručuje?

Gde mogu da kupim? | Dodatna pitanja | Pošalji prijatelju

info telefoni: 011/334-56-17, 011/3340-749, 011/32-35-332, 063/425-100

Karakteristike

Analog Inputs4,electronically balanced,Phoenix-type
Amplifier Gain (dB)32 dB (Lo-Z),33 dB (70V),36 dB (100V)
Continuous rated power (1k Hz,THD 1%) 2Ω500 Watts
Continuous rated power (1k Hz,THD 1%) 4Ω500 Watts
Input Impedance (balanced)20 kΩ
Continuous rated power (1k Hz,THD 1%) 8Ω250 Watts
Continuous rated power(20-20k Hz,THD450 Watts
Continuous rated power(20-20k Hz,THD225 Watts
Maximum bridged output 4Ω1000 Watts
Maximum bridged output 8Ω1000 Watts
CAN Bus InterfaceYes (With Optional RCM-810 Card)
Frequency Response15 Hz-30 kHz
Audio NetworkNo
Variable Load Drive (VLD)Yes
Slew Rate< 28 V / µs
Mains Voltage220-240 V
50-60 Hz or 120 V
50-60 Hz
50-60 Hz
CoolingFront-to-Rear
continuously variable fans
Continuous rated power (1k Hz,THD 1%) 100v500 Watts
Continuous rated power (1k Hz,THD 1%) 70v500 Watts
Continuous rated power(20-20k Hz,THD450 Watts
Continuous rated power(20-20k Hz,THD450 Watts
Electronics TypeAmplifier
Network Control (IRIS-Net)Optional
Total harmonic distortion< 0.05 %
Intermodulation Distortion (SMTPE)< 0.05 %
DIM 30< 0.02 %
Input Sensitivity0 dBu (.775V)-2 Ohms,+3 dBu (1.1V)-4/8 Ohms,+6 dBu (1.55)70V/100V
Weight Net11.1 kg ( 24.47 lbs )
Dimensions (HxWxD)88.1 x 481 x 421.5 mm

Opis

The CPS4.5 is an four-channel amplifier from Electro-Voice featuring groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks.

Each channel individually provides transformer-less, switchable output characteristics, which enable specific channels to achieve maximum performance. Power into 2 Ohms, 4 Ohms, 70V or 100V lines are all possible, and no transformer is required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power.

The contractor-friendly CPS4.5 also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power switching via remote contact closure, and real panel attenuators.

A module slot for the optional RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics via IRIS-Net software. In addition, using the RCM-810's Variable Load Drive (VLD) feature can tailor the amplifier's output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms.

Komentari o proizvodu NOVO!Comments

Podeli sa drugima svoje iskustvo/mišljenje! Ne objavljuju se komentari koji sadrže: Psovke, vređanje, VELIKA SLOVA, lične poruke, oglase, reklamiranje i cene kod konkurencije.

blog comments powered by Disqus