Crown CTS4200A pojačalo

Crown CTS4200A pojačalo

proizvođač: Crown

Crown's CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications.

8

cena: 2371 $

Dodatna pitanja

info telefoni: 011/334-56-17, 011/3340-749, 063/586-473

Karakteristike

Power Output
DUAL4 Channels Driven
4 Ohm (Per Channel) - 260W
8 Ohm (Per Channel) - 200W
70V (Per Channel) - 220W
DUAL1 Channel Driven
4 Ohm (Per Channel) - 270W
8 Ohm (Per Channel) - 220W
70V (Per Channel) - 250W
BRIDGED-Mono2 Channel-Pairs Driven
8 Ohm (Per Channel Pair) - 520W
16 Ohm (Per Channel Pair) - 400W
100V (Per Channel Pair) - 220W
BRIDGED-Mono1 Channel-Pair Driven
8 Ohm (Per Channel Pair) - 560W
16 Ohm (Per Channel Pair) - 440W
100V (Per Channel Pair) - 250W
Specifications
Frequency Response (at 1 Watt, 20Hz - 20 kHz)�0.5 dB
Phase Response (at 1 Watt, 10Hz - 20 kHz)�35�
Signal to Noise Ratio below rated power (20 Hz to 20 kHz)100 dB un-weighted
Total Harmonic Distortion (THD) at 1 Watt, from 20 Hz to 20 kHz
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 41
from 163 milliwatts to full Bandwidth power:
Damping Factor 10 Hz to 400 Hz>180
Crosstalk (below rated power, 20 Hz to 1 kHz)>80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)>50 dB
DC Output Offset (Shorted input)
Input Impedance nominally Balanced, nominally Unbalanced20 k Ohms
10 k Ohms
Maximum Input Level (before input Compression)+20 dBu
Load Impedance (NoteSafe with all types of loads)
Stereo2
4
8 and 25 Ohms (70V)
Bridge Mono4
8
16 and 50 Ohms (100V)
Voltage Gain (at maximum level setting), 1.4V Sensitivity
4/8 Ohm Operation20:1 (26 dB)
70V Operation50:1 (34 dB)
100V Operation71.4:1 (37 dB)
Required AC Mains120V 60 Hz
220/230/240V/50 Hz
Power Draw at Idle (120VAC mains)
All channels in 4/8 Ohm mode70W
CoolingVariable-speed
forced air
Dimensions
Width, 19 in. (48.3 cm.)
Height, 3.5 in. (8.9 cm.)
Depth, 16.25 in. (41.3 cm.)
Net Weight, 27 lb, 8 oz (12.5 kg)

Opis

Crown's CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications.

CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet and CobraNet allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Features

  • High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
  • New Crown Switching Power Supply for lighter weight
  • Selectable "Constant-Voltage" or low-Impedance (4/8 Ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
  • 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
  • Legendary Crown class I (BCA) and AB+B output topologies offer the best in Amplifier reliability
  • 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems� New "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
  • Comprehensive array of indicators provide accurate diagnostics
  • Two-channel models are fully PIP2-compatible. Multi-channel models accept new MC accessory modules

PDF Documents

Komentari o proizvodu NOVO!Comments

Podeli sa drugima svoje iskustvo/mišljenje! Ne objavljuju se komentari koji sadrže: Psovke, vređanje, VELIKA SLOVA, lične poruke, oglase, reklamiranje i cene kod konkurencije.

blog comments powered by Disqus

Prodajete polovan muzički instrument?

  1. Donesite Vaš instrument kod nas i mi ćemo ga proceniti potpuno BESPLATNO
  2. Oglasite Vaš instrument na našem sajtu: www.polovniinstrumenti.com