Dynacord LX 3000 pojačivač

proizvođač: Dynacord

The new flagship of the LX series delivers a mighty 2 x 2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms and therefore has plenty of headroom for large subwoofer arrays.

cena: 221.100,00 din.

(PDV uračunat)

Dodaj u korpu Kako se naručuje?

Gde mogu da kupim? | Dodatna pitanja | Pošalji prijatelju

info telefoni: 011/334-56-17, 011/3340-749, 011/32-35-332, 063/425-100

Uputstvo / brošura (pdf)

Video

Karakteristike

Maximum Midband Output Power THD = 1%, 1kHz, Dual Channel	2 ohms- 2100 W; 4 ohms- 1500 W; 8 ohms- 900 W
Rated Output Power THD < 0.1%, 20Hz-20kHz	4 ohms- 1200 W; 8 ohms- 600 W
Max. Single Channel Output Power Dynamic-Headroom, IHF-A	2 ohms- 2900 W; 4 ohms- 1800 W; 8 ohms- 1000 W
Max. Single Channel Output Power Continuous, 1kHz	2 ohms- 2600 W; 4 ohms- 1700 W; 8 ohms- 950 W
Max. Bridged Output Power THD = 1%, 1kHz	4 ohms- 4200 W; 8 ohms- 3000 W
Maximum RMS Voltage Swing THD = 1%, 1kHz	95 V
Power Bandwidth THD = 1%, ref. 1kHz, half power @ 4ohms	10 Hz - 60 kHz
Voltage Gain ref. 1kHz	32.0 dB
Input Sensitivity at rated output power	+7.0 dBu (1.74 V rms)
THD at rated output power,MBW = 80kHz, 1kHz	< 0.05%
IMD-SMPTE 60Hz, 7kHz	< 0.02%
DIM30 3.15kHz, 15kHz	< 0.05%
Maximum Input Level	+22dBu (9.76 Vrms)
Crosstalk ref. 1kHz, at rated output power	< - 80dB
Frequency Response -1dB, ref. 1kHz	15Hz - 40kHz
Input Impedance active balanced	20 kohms
Damping Factor 1kHz	> 300
Signal to Noise Ratio, Amplifier A-weighted	108 dB
Output Stage Topology	Class H
Power Requirements	240V 230V 220V 120V or 100V; 50Hz - 60 Hz (factory configured)
Power Consumption 1/8 maximum output power @ 4ohms	1070 W
Protection	Audio limiters High temperature DC HF Back-EMF Peak current limiters Inrush current limiters Turn-on delay
Cooling	Front-to rear 3-stage-fans
Dimensions (W x H x D)	483 mm x 88.1 mm x 384 mm
Weight	8.70 kg

Opis

LX power amps combine outstanding audio performance, highest reliability and operational safety.

The audio performance of LX power amps are simply extraordinary. The new switchmode power supply technology, completely designed from scratch and the consistent use of Class-H technology provide extensive headroom far above the stated nominal output and conspicuous reduction in leakage power at the same time.

The employed switching power supply combines the headroom-advantage of a transformer power amplifier with low weight of a pulsed power supply unit resulting in an improved performance-to-weight ratio. Special attention had been given to high efficiency and interference immunity already in the designing stage with the result that trouble-free operation of LX power amps is possible even in EMVcritical environments.

The power amplification stages of the LX amps follow Class-H technology design, i.e. the power amp provides extremely fast, signal-dependent operating voltage switching, which, results in doubling the regular supply voltage when needed. Compared to Class-AB power amps, Class-H power amps generate by far less power dissipation at identical output. Consequently, reduced leakage power or dissipation is synonymous to less waste heat. In other words: energy is used more efficiently! As a result, installing Class-H power amps within rack shelf systems is possible with less space between appliances. In addition to that and despite offering identical output, power consumption is a lot less than in Class-AB operation.

Being protected against thermal and electrical overload, short circuit and the occurrence of HF/DC at the outputs, DYNACORD LX power amps fulfill even the most demanding requirements of Pro-Audio touring applications. Back-EMF-Protection eliminates the risk of the output transistors being damaged by electrical energy back-feed. The power outputs are switched via relay with a time delay during softstart and an inrush current limiter additionally prevents mains fuses from blowing.

Mechanical construction and workmanship also comply with the highest precision manufacturing standards. The robust chassis is extremely rigid which makes it especially suitable for wearing touring applications. Two three-speed high performance fans (off/slow/fast) guarantee outstanding thermal stability at absolute low running noise. Front-to-rear ventilation allows trouble-free operation even in smaller amp-racks. The electronically balanced inputs are carried out via XLR-type connectors. Direct-Outs for through connecting the audio signal are also provided via XLRM-type connectors. Input Routing allows selecting DUAL (stereo) or PARALLEL (monaural) operation mode. By means of the separate BRIDGED OUT-connector and a Bridged Mode-switch, switching to “Mono Bridged” operation is truly uncomplicated as well. The recessed mounted dB-scaled level controls ensure reliable protection against mechanical damage. These particularly precise, secure to operate detent-potentiometers are located on the front panel. LX power amps provide the opportunity for retrofitting an internal analogue signal processor board with x-over and filter functions. The easily readable LED display provides a quick overview of the power amp’s current operational status. The power outputs CHANNEL A, CHANNEL B and BRIDGED OUT are carried out as extremely durable SPEAKON-type connectors. Also located on the rear panel is a Ground-lift switch, which, when needed, helps eliminating ground-noise loops by separating the power amp’s enclosure from the circuit ground. In normal operation, all LX power amps are capable of driving loads as low as 2ohms. In Mono- Bridged mode the allowable minimum load is 4ohms.

Komentari o proizvodu ^NOVO!Comments

Podeli sa drugima svoje iskustvo/mišljenje! Ne objavljuju se komentari koji sadrže: Psovke, vređanje, VELIKA SLOVA, lične poruke, oglase, reklamiranje i cene kod konkurencije.

blog comments powered by Disqus

Slični proizvodi / slična cena

BSS FCS-960 Dual Channel/Mode Graphic EQ

The BSS Audio FCS-960 is a 30-band graphic equalizer featuring Dual Mode switching between Normal and Fine filter width settings on each channel.

cena: 216.260,00 din.
BSS FDS-336T MINIDRIVE

BSS Audio FDS-336T Minidrive Loudspeaker Management System 2x6 provides all four core functions of the Omnidrive range: crossovers, mid-band limiters, equalisation freely assignable to inputs and outputs, and both input and output delay.

cena: 198.110,00 din.
Dynacord L 2400 pojačivač

The L-2400 embody separate and fully independent DUAL-MONO power supply units. The toroidal mains transformers are custom-produced at our very own manufacturing site in Germany and possess particularly low magnetic field radiation characteristics.

cena: 275.000,00 din.
Dynacord LX 2200 pojačivač

Delivering 2 x 600 watts into 8 ohms, and combining analog class-H design with a state-of-the-art switching power supply, the LX2200 delivers serious power with pristine audio quality while weighing in at only 8.15 kilograms.

cena: 176.000,00 din.
Dynacord DSA 8405 pojačivač

4 x 500 W Output Power in Class D Topology, 2 HU, optional Remote Control Module (RCM-810)

cena: 180.400,00 din.
Dynacord DSA 8410 pojačivač

4x 1000 W Output Power in Class D Topology, 2 HU, optional Remote Control Module (RCM-810)

cena: 231.000,00 din.
Dynacord DSA 8805 pojačivač

8 x 500 W Output Power in Class D Topology, 2 HU, optional Remote Control Module (RCM-810)

cena: 261.800,00 din.
Dynacord Xa 4000 pojačivač

Universally usable Xa 4000 active 2-way power amplifier provides Class H technology and a switching power supply

cena: 210.100,00 din.