Dynacord L 2400 pojačivač

The L-2400 embody separate and fully independent DUAL-MONO power supply units. The toroidal mains transformers are custom-produced at our very own manufacturing site in Germany and possess particularly low magnetic field radiation characteristics.

cena: 275.000,00 din.

(PDV uračunat)

Dynacord L 2400 top klasa pojačivača, 2 x 1200W (4 oma) Output Power.

Dodaj u korpu Kako se naručuje?

Gde mogu da kupim? | Dodatna pitanja | Pošalji prijatelju

info telefoni: 011/334-56-17, 011/3340-749, 011/32-35-332, 063/425-100

Video

Karakteristike

Continuous rated power (1k Hz, THD 1%) 2Ω	1800 Watts
Continuous rated power (1k Hz, THD 1%) 4Ω	1300 Watts
Input Impedance (balanced)	20 kΩ
Continuous rated power (1k Hz, THD 1%) 8Ω	850 Watts
Continuous rated power(20-20k Hz, THD	1200 Watts
Continuous rated power(20-20k Hz, THD	750 Watts
Maximum bridged output 4Ω	3600 Watts
Maximum bridged output 8Ω	2600 Watts
Slew Rate	> 40 V / µs
Electronics Type	Amplifier
Network Control (IRIS-Net)	No
Total harmonic distortion	< 0.05 %
Intermodulation Distortion (SMTPE)	< 0.01 %
DIM 30	< 0.01 %
Signal-to-noise ratio (A–weighted)	> 105 dB
Input Sensitivity 0 dBu	/ +6 dBu / +26 dB
Dimensions (H x W x D)	133 mm x 483 mm x 390 mm
Weight	29 kg

Opis

There are two main approaches in designing high-performance power amplifiers: get as many watts as possible for as little money as necessary or set the designing standards without compromise to the highest achievable audio performance at the threshold of the physically attainable, ensure highest reliability and go for the best in professional audio equipment that today’s technology can accomplish. It is doubtless, that combining these two apparently conflicting design-profiles would offer the best solution: due to their advanced topology, Linear Precision Series power amps combine excellent audio performance, modern and innovative circuit design, meticulous and exceptionally rigid construction, and the highest levels of operational integrity and reliability with an appropriate and more than realistic price. So, why pay more for leading edge technology ”Made in Germany”? Well, on the other hand – it cannot be done for less. The robust steel chassis provides outstanding torsional strength through L-shaped side panels reaching under the thick aluminium front panel. Thermal breakers prevent the power supply units from being damaged by thermal overload. Electronically controlled fans provide sufficient frontto- rear airflow and a special cool air diverter takes care of thermal stability. The fans’ noise-level is extremely low which provides the possibility for studio use. If necessary, a supplied air-filter can be mounted behind the front panel ventilation louvres. Delayed switching the power outputs during a soft-start is accomplished via relays and an initial inrush current limiter prevents the mains fuses from being blown.

Extensive protection circuitry includes the relay-switching of the speaker-terminals in cases of short-circuit and prevent the occurrence of DC or RF at the power outputs. A selectable Hi-/Lo-Cut filter limits the amplifier’s response to the audible spectrum, preventing the amplification of extreme LF and HF out of band signals. Additionally, a special protection circuit – the Back-EMF Protection – protects the Linear Precision power amplifiers from damages resulting from high-level, high-energy feedback from a faulty loudspeaker system. Comparator circuits continuously monitor the amplifier’s input and output signals and activate internal limiters whenever a non-linear operational state is detected. These limiters have acoustically optimised time constants and can also be switched to the appropriate speed according to the application they are used in; from FAST (e. g. for use as a Mid/Hi amplifier) to SLOW (e. g. when driving sub woofers). This serves as a protection for the connected loudspeaker systems against overload caused by clipping in the power amplifier’s output stages.

The L-1600 and L-2400 embody separate and fully independent DUAL-MONO power supply units. The toroidal mains transformers are custom-produced at our very own manufacturing site in Germany and possess particularly low magnetic field radiation characteristics. All components are of selected quality and are generously rated for unrivaled quality.

Komentari o proizvodu ^NOVO!Comments

Podeli sa drugima svoje iskustvo/mišljenje! Ne objavljuju se komentari koji sadrže: Psovke, vređanje, VELIKA SLOVA, lične poruke, oglase, reklamiranje i cene kod konkurencije.

blog comments powered by Disqus

Slični proizvodi / slična cena

BSS FDS-366T OMNIDRIVE COMPACT plus

One FDS-366 can drive a true stereo 3-way system, or 3 bi-amp outputs for monitors. Add more units and MIDI slave linking to make stereo 4, 5 and even 6-way systems.

cena: 340.340,00 din.
BSS FCS-960 Dual Channel/Mode Graphic EQ

The BSS Audio FCS-960 is a 30-band graphic equalizer featuring Dual Mode switching between Normal and Fine filter width settings on each channel.

cena: 216.260,00 din.
Dynacord LX 3000 pojačivač

The new flagship of the LX series delivers a mighty 2 x 2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms and therefore has plenty of headroom for large subwoofer arrays.

cena: 221.100,00 din.
Dynacord DSA 8410 pojačivač

4x 1000 W Output Power in Class D Topology, 2 HU, optional Remote Control Module (RCM-810)

cena: 231.000,00 din.
Dynacord DSA 8805 pojačivač

8 x 500 W Output Power in Class D Topology, 2 HU, optional Remote Control Module (RCM-810)

cena: 261.800,00 din.
Dynacord Xa 4000 pojačivač

Universally usable Xa 4000 active 2-way power amplifier provides Class H technology and a switching power supply

cena: 210.100,00 din.
Dynacord PM 2600 pojačivač

The PM2600 4-channel controlled power amplifier provides an overall output power capacity of 2600 watts into 4 ohms. The amplifier has been mainly designed to easily accomplish professional active 2-way sound reinforcement installations..

cena: 283.800,00 din.