Crown XLS5000D pojačivač

The XLS Series, Crown's workhorse amplifier line for musicians and DJs, has now been extended with the addition of the beefy new XLS 5000. Delivering 1800 watts per channel in four-ohm stereo mode, and a staggering 5000 watts in four-ohm bridge-mono mode, the XLS 5000 packs more than twice the punch of the next highest-powered model in the range, the XLS 802.

"Providing more watts per dollar than any other amplifier in its class, the XLS 5000 represents a tremendous value to end users who need a big amp without a big price tag," says Andy Flint, Crown Vertical Market Manager, Portable PA. "By pairing this amplifier up with JBL's MRX, SRX or VRX loudspeaker enclosures, our customers can now have access to a highly professional yet economical all-Harman solution."

Housed in a rugged, 3U, all-steel chassis, the highly reliable XLS 5000 is equipped with an efficient forced-air fan to prevent excessive thermal buildup. The front panel sports dual precision-detented rotary level controls, a power switch with accompanying LED, and six additional LEDs indicating signal, clip, and fault for each channel. Rear panel connections include two electronically balanced XLR inputs as well as touch-proof binding post and Speakon(r) outputs.

Minimum Guaranteed Power per channel, both channels driven   XLS 202 XLS 402 XLS 602 XLS 802 XLS 5000 1 kHz with 0.5% THD Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 8 ohms Bridge-Mono, 4 ohms -- 300W 200W 600W -- -- 450W 300W 900W -- -- 600W 380W 1,200W -- -- 800W 500W 1,600W -- *750W for 100V models 2,500W** 1,800W* 1,100W* 3,600W* 5,000W** *with 0.1% THD **with 1% THD Sensitivity (volts RMS) for full rated power at 4 ohms 1.25 Frequency Response (at 1 watt, 22 Hz - 20 kHz) +0 dB, –1 dB Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power > 100 dB > 95 dB Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz < 0.5% Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.3% Damping Factor (8 ohm): 10 Hz to 400 Hz > 200 Crosstalk (below rated power) at 1 kHz at 20 kHz –75 dB –50 dB Input Impedance (nominal) (balanced, unbalanced) 20 kilohms, 10 kilohms Load impedance Stereo Bridge mono 4-8 ohms 8 ohms AC Line Voltage and Frequency Configurations Available (± 10%) 120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz Ventilation Flow-through ventilation from front to back Cooling Internal heat sinks with forced-air cooling Air Volume Requirements (per minute per unit) 80.15 ft3 (2.27 m3) Dimensions: Width, Height, Depth XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D. XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D. Net Weight, Shipping Weight XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg) XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg) XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg) XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg) XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)